Table of Contents

**Declaration:**

Union( inRightSet as VArraySet ) as VArraySet

**Parameters:**

**inRightSet**- The set to be used in the operation.

**Description:**

Executes a union of this set with the inRightSet set. The result becomes this set. Such an operation is said to be “in place”.

Note: Both sets must be of the same type (BitSet or ArraySet).

**Example:**

s1.Union( s2 )

**Declaration:**

Intersection( inRightSet as VArraySet ) as VArraySet

**Parameters:**

**inRightSet8**- The set to be used in the operation.

**Description:**

Executes an Intersection of this set with the inRightSet. The result becomes this set. Such an operation is said to be “in place”.

Note: Both sets must be of the same type (BitSet or ArraySet).

**Example:**

s1.Intersection( s2 )

**Declaration:**

Difference( inRightSet as VArraySet ) as VArraySet

**Parameters:**

**inRightSet**- The set to be used in the operation.

**Description:**

Executes the difference of this set with the inRightSet. The result becomes this set. Such an operation is said to be be “in place”.

Note: Both sets must be of the same type (BitSet or ArraySet).

**Example:**

s1.Difference( s2 )

**Declaration:**

SymmetricDifference( inRightSet as VArraySet ) as VArraySet

**Parameters:**

**inRightSet**- The set to be used in the operation.

**Description:**

Executes the SymmetricDifference of this set with the inRightSet. The result becomes this set. Such operation is said to be “in place”.

Note: Both sets must be of the same type (BitSet or ArraySet).

**Example:**

s1.SymmetricDifference( s2 )